Email：shaolinjq@126.com

 WhatsApp：+8613889000767 

★★★★★
Contact us

 
6S shaking table:

Product Type:Mineral processing equipment

Designed Capacity: 10–60 t/h

Feeding Size: 0.15–2 mm

Customizable: Color, model, pattern

Condition: Brand new

 
Applied material:
Tungsten ore, tin ore, tantalum-niobium ore: Core selected equipment for obtaining high-grade concentrate.
Gold ore: Sand gold recovery, heavy selection in the rock gold beneficiation process.
Iron ore, manganese ore, chromium ore: Concentration or tailing of fine-grained disseminated ores.
Rare metal ores, precious metal ores: Sorting of materials such as zircon, ilmenite, monazite, etc. Non-metallic ores: Purification of materials such as quartz sand decontamination (iron, titanium, etc.), fluorite, barite, etc.

Introduction
Operating Principle
physical display
performance and advantages
Technical Parameter

Introduction

Shaking Table is also called Shaking Concentrator or Table Concentrator, which is a mine selecting machine for fine materials and it works by gravity. It is widely used in selection of tin, tungsten, gold, silver, lead, zinc, tantalum, niobium, iron, manganese, ferrotitanium and coal.
The shaking table comprises eight parts, including the bed head, motor, slope regulator, bed surface, mine tank, water tank, rifling bar and lubrication system. The longitudinal reciprocating motion of the bed surface is realized through the crank-link transmission mechanism.

The shaking table is applicable to the separation of fine and fine-grained rare metals, ferrous metals, non-ferrous metals, precious metals and other ores and coal. It can not only be used as an independent beneficiation operation, but also be used in combination with jigs, spiral concentrators, centrifugal concentrators, etc. or other beneficiation methods. This product is produced by the only designated enterprise of the former Ministry of Geology and Mineral Resources and implements industry standards. This equipment separates minerals according to the specific gravity difference of the minerals to be selected and their layering performance in the reciprocating asymmetric motion and the transverse water flow on the inclined table surface. It has the characteristics that minerals with different specific gravities are clearly zoned on the table surface, high concentrate quality, convenient operation and adjustment, etc. The structure of the shaking table surface is divided into coarse sand, fine sand and slime, specifically including 46 grooves, 60 grooves double-curved wave, 60 grooves single-curved wave, 80 grooves, 90 grooves, 110 grooves, 120 grooves, 135 grooves, 150 grooves, floating table surface, etc.
The materials are respectively fiberglass or wooden shaking table surface. The structure of the shaking table is divided into: The fixed support shaking table does not come with an installation bracket. Before installation, it is necessary to pour cement and embed anchor bolts in advance. It is not easy to move and has a low cost; The small channel steel shaking table is easy to install. Only simple cement pouring and anchor bolt embedding are required. It has a moderate price and is easy to move; The large channel steel shaking table (does not require cement pouring and anchor bolt embedding, is quick and easy to install, easy to disassemble and move. It is suitable for operation on sandy land, soft ground and ships

Operating Principle

We are a leading company dedicated to empowering individuals to achieve their dreams through innovative solutions and exceptional services.

The sorting process of the 6S shaker is the result of a combination of mechanical vibration and inclined water flow:
Feeding: Slurry (mineral particles mixed with water) is evenly conveyed through the feed chute to the head of the bed (also known as the countertop).
Bed movement: Driven by a transmission mechanism (usually a cam lever type or an eccentric linkage), the bed surface does asymmetrical reciprocating motion:
Forward Stroke: Slower speed with less acceleration.
Return stroke: Faster speed and greater acceleration.
This asymmetrical movement facilitates longitudinal (along the length of the bed) stratification and migration of particles according to density.
Slope flow: Clean water (flush water) flows across the bed surface from the side opposite the feed tank (high end). The water flow covers the entire surface of the bed, creating a thin layer of inclined water flow.
Particle stratification and zoning:
Longitudinal stratification: Under the action of shear and inertial forces of reciprocating motion of the bed, the ore particles are loose and layered on the bed. The high-density particles settle to the bottom layer, and the low-density particles are in the upper layer.
Transverse zoning: Under the action of transverse water flow, the upper layer (low density) particles are subjected to a large flow impulse and are washed farther; The lower layer (high-density) particles are less affected by the water flow, and are mainly affected by the friction and inertia force of the bed surface, and move towards the concentrate end (opposite the transmission end).
Comprehensive motion trajectory: Particles with different densities and particle sizes, with different directions of resultant force for longitudinal and transverse movements, finally form a fan-shaped zone from the ore feed end to the concentrate end and from the high end to the low end on the bed surface. The high-density particles (concentrate) are concentrated near the drive side (high-end), the medium-density particles (medium-ore) are in the middle area, and the low-density particles (tailings) are washed to the farthest tailings end (low-end).
Product collection: There is a dividing plate (ore separation plate) at the end of the bed, which separates the strips of different grades, and the concentrate, medium ore and tailings flow into the corresponding ore connection tank for discharge.

Product details and physical display

Product performance and advantages

Abundant Spare Parts Supply for Peace of Mind
With a reliable supply chain for spare parts, you can operate worry-free, knowing that replacements are readily available whenever needed. This ensures minimal downtime and uninterrupted production.

Efficient separation:


Precise separation is achieved by using the differences in density, particle size, and shape of mineral particles, with high enrichment ratio.

Strong ability to handle fine-grained materials:

It is especially good at handling fine-grained and fine-grained minerals that are difficult to effectively sort by other gravity equipment.

Intuitive and flexible operation:

Parameters such as stroke, stroke, bed inclination, flushing volume can be easily adapted to different ore properties.

Clear banding and stable indicators:

The sorted minerals present clear bands on the bed surface, which is convenient for operators to observe and adjust, and ensure stable product quality.

Low operating costs.Sturdy and durable structure:

low energy consumption, relatively controllable water consumption, simple maintenance, and economical comprehensive operating costs.Made of high-quality steel, the key components are reasonably designed, the operation is smooth and reliable, and the service life is long.

Technical Parameter

型号/ model单位Uite6S4500/18506S3000/1620LY2100/1050LY1100/500
床面尺寸/Bed sizemm4500/1850/15603000/1620/1102100/1050/8501100/500/430
冲程/strokemm10-306-3012-289-17
冲次/Punch次/min240-420210-320210-320280-460
坡度/gradiento0-50-100-80-10
给料粒度/Feeding particle size矿砂Mineral sandsmm2222
矿泥Mining mudmm0.0740.10.0740.074
给矿浓度/Ore feed concentration%10-3010-3010-3010-30
耗水量 Water consumption（t/h）t/h0.4-1.80.3-1.50.2-10.1-0.5
功率/ powerkw1.11.11.10.55
处理量/Processing volume矿砂Mineral sands(t/h)0.5-1.80.7-1.50.4-0.80.1-0.2
矿泥Mining mud(t/h)0.5-0.80.4-10.3-0.50.05-0.1
外形/shapemm5800/1850/8804070/1320/7803040/1050/10202150/500/700
重量/weightkg1350700420150

Professional service, intimate guarantee

Rooted in China, facing the world. Shaolin Heavy Machinery machines always take “sincere customer service” as the source of power for the company’s development, subdivide customer needs, and provide tailor-made machinery and equipment.

Company Visit

Online and on-site factory visit is available, along with pick-up service, we request the pleasure of your company.

Full-Tech Support

We guarantee full tech support and after-sale service, including door-to-door installation guidance and maintenance.

Factory-direct Sale

We are the source factory with 50 years of experience in manufacturing heavy mining machinery. Your best choice is to choose one, and it is also a wholesale price.

Fast Delivery

Any order made shall be duly shipped and expect arrival within 7-45 days.

Send Us a Message

First Name
Last Name
Email
Message
The form has been submitted successfully!
There has been some error while submitting the form. Please verify all form fields again.

Contact Us

Email

shaolinjq@126.com

Phone

+86 13889000767

Address

Cui Miao Town Xingyang, Zhengzhou Henan Province, 450100 China

Follow Us:

Related Posts